talkingoreo.blogg.se

Yn 622 n supersync
Yn 622 n supersync










yn 622 n supersync
  1. #Yn 622 n supersync install#
  2. #Yn 622 n supersync update#
  3. #Yn 622 n supersync manual#

Wait a few seconds until the device is detected. Click on "Browse." Button and navigate to the firmware you download in step 2. Connect the device to your PC via a USB cable. The screen will show firmware upgrade interface. Turn off YN-622N-TX, keep pressing mode button and turn on it again.

#Yn 622 n supersync update#

Download the most update firmware package and unzip it.

#Yn 622 n supersync install#

When you prepare to upgrade YN-622N-TX first time, please download the driver and software package YN_Trigger_Updater.zip, uncompress it and run YN_Trigger_Updater_Setup.exe to install the driver/software.

  • *The above functions need to be used with the YN-622N transceiver.
  • Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).
  • The flash sync signal can be input through the PC port.
  • Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
  • Support simulate (modeling) flash, red-eye reduction flash.
  • Support exposure compensation, flash value lock function(FVL).
  • yn 622 n supersync

  • Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.
  • The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.
  • #Yn 622 n supersync manual#

  • Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.
  • Grouping flash mode: i-TTL/Manual flash/Super sync.
  • Equipped with the AF focus assist light (can be disabled).
  • The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.
  • Support wireless shutter release function.
  • The firmware can be upgraded through the USB interface.
  • LCD screen display, multi-buttons quick operation.
  • In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manua, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. Other brand flashes not for Nikon: Metz, Sunpak, Oloong, Triopo Other brand flashes working with Nikon system: Metz, Sunpak, Oloong, Triopoī: Other Flashes: (Not support TTL function or HSS) A: ITTL Flash: ( It supports wireless remote control through camera menu )












    Yn 622 n supersync